// Licensed Electrician · Brooklyn, New York City
Licensed Electrician
in Brooklyn
MP Electric NYC has been serving Brooklyn homeowners, landlords, and businesses for over 20 years. From pre-war brownstones in Park Slope to new construction in Williamsburg — we know Brooklyn’s building stock and its electrical quirks.
Electrical services in Brooklyn
MP Electric NYC provides full electrical services throughout Brooklyn. Whether you’re in a 1920s Park Slope brownstone or a new Williamsburg condo, we have the experience with Brooklyn’s specific building types, DOB requirements, and electrical systems.
EV Charger Install
Level 2 home chargers for all EV brands. NY State incentive guidance.
Electrical Inspection
Safety and pre-purchase inspections. Insurance compliance reports.
Brooklyn building types & electrical considerations
Brooklyn has some of the most diverse housing stock in New York City — and some of the most complex electrical work as a result. Pre-war brownstones (pre-1940) dominate neighborhoods like Park Slope, Carroll Gardens, Bed-Stuy, and Crown Heights. These buildings typically have original knob-and-tube wiring, undersized 60A or 100A panels, and no ground wires throughout.
Post-war attached houses in Bay Ridge, Sunset Park, Borough Park, and Flatbush were often built in the 1940s–1960s, many with aluminum branch circuit wiring from the mid-1960s on. These homes frequently need aluminum wiring remediation before insurers will renew coverage.
New construction and loft conversions in Williamsburg, DUMBO, and Greenpoint are a different world — 200A+ service, 3-phase commercial infrastructure in some buildings, high demand for EV chargers and smart home integration.
Brooklyn co-ops and condos: We regularly work in Brooklyn co-op buildings and handle all board approval documentation, alteration agreements, and insurance certificate requirements. We know which Brooklyn buildings have specific electrical restrictions and how to work within them.
DOB district office: Brooklyn electrical permits are processed through the Brooklyn DOB office. We file, track, and close all permits — you don’t touch the paperwork.
Neighborhoods we serve in Brooklyn
We cover every Brooklyn neighborhood — from the waterfront in Red Hook and DUMBO to the residential streets of Borough Park and Flatbush. Here’s a sample of where we work and what the electrical needs tend to be:
Park Slope
Brownstones, pre-war multi-family. Common K&T wiring, knob-and-tube replacement, panel upgrades.
Williamsburg
Mix of pre-war loft conversions and new construction. High EV charger demand, commercial electrical.
DUMBO
Converted industrial buildings, high-end residential. Smart home wiring, commercial fit-outs.
Bed-Stuy / Crown Heights
Large pre-war brownstone stock. Rewiring, K&T replacement, panel upgrades.
Flatbush / Midwood
Attached houses, 1920s–1950s construction. Panel upgrades, aluminum wiring, inspections.
Carroll Gardens / Cobble Hill
Brownstones and townhouses. Pre-purchase inspections, smart home, panel upgrades.
Bushwick
Mix of renovated industrial and residential. Smart home, commercial, lighting.
Bay Ridge / Sunset Park
Attached brick houses. Panel upgrades, rewiring, generator installation.
Greenpoint
Mix of pre-war and new construction. Polish-community brownstones, EV chargers, smart home.
Borough Park / Kensington
Dense residential. Panel upgrades, safety inspections, co-op compliance.
Fort Greene / Clinton Hill
Pre-war townhouses and brownstones. Full rewiring, smart home integration.
Red Hook / Gowanus
Industrial-to-residential conversion. 3-phase commercial, smart home rough-in.
Brooklyn service area map
We serve all neighborhoods in Brooklyn. Call (917) 679-0125 to confirm coverage for your specific address.
What our Brooklyn customers say
“Upgraded our panel in a 1920s Park Slope brownstone. They handled ConEd, the DOB permit, everything. The inspector passed it first try. Couldn’t have been smoother for an old building.”
“Replaced knob-and-tube wiring in our Bed-Stuy brownstone so we could finally get homeowners insurance at a normal rate. MP Electric was honest about what needed replacing and what didn’t. Saved us from a much bigger job.”
“Installed a ChargePoint EV charger in our Cobble Hill brownstone garage. They pulled the permit, coordinated with our co-op board, and had it done in one morning. Highly recommend.”
Frequently asked questions — Brooklyn
Yes. We cover all Brooklyn neighborhoods including Park Slope, Williamsburg, DUMBO, Bed-Stuy, Crown Heights, Flatbush, Carroll Gardens, Cobble Hill, Fort Greene, Bushwick, Greenpoint, Bay Ridge, Sunset Park, Borough Park, Red Hook, Gowanus, and more.
For standard appointments, we schedule within 2–5 business days. For emergency calls, we respond within 1–3 hours throughout Brooklyn, 24/7, 365 days a year.
Yes — we work in Brooklyn co-ops regularly and handle all board approval documentation, alteration agreements, and building insurance requirements. We know the process and what buildings need to approve electrical work.
Yes. All permitted work includes DOB filing and inspection coordination. Brooklyn permits are processed through the Brooklyn DOB district office, which we work with regularly.
Knob-and-tube wiring replacement and panel upgrades. Most Brooklyn brownstones built before 1945 have original K&T wiring on some or all circuits, and 60A or 100A service that’s inadequate for modern loads. We assess both as part of every brownstone quote.
Yes. EV charger installation is one of our fastest-growing Brooklyn services. We install Level 2 chargers for all EV brands, handle DOB permits, and advise on NY State and federal incentives that can reduce your out-of-pocket cost.
Get a free quote in Brooklyn
Call or request a quote online. We’ll assess your Brooklyn home, give you a written fixed price, and handle all permits. No surprises.